>> homepage Post messages Homepage:Login:Register:Soul:Top Host 
Forum style Interface Style:  

28F128J3C read/write problem Reply  
handsome
rus5404
 I have a problem with reading, writing flash memory 28f128j3c, BGA64. When I bought the VP 996 programmer, everything worked perfectly, and while there was the programming of the chip, the programmer flashing blue LED. I do not remember when it started, but now I can read, write the chip only in the slow read/write mode. I thought it was my faulty chip, but I recently bought a new 12 pieces, but the problem still the same.
[ The message is modified by rus5404 ]
Go back list [ Posted:2015-10-21 03:02:27 ] Edit Administer top

Re:28F128J3C read/write problem Reply  
handsome
rus5404
 I picked up a new chip, load dump and press program, but as just erasing process is finished, progress bar remains empty indefinitely, and the LED on the board does not light or blink. But if you put a check mark on the mode slow read/write, the progress bar goes as usual (LED still is not flashing), the programming is completed successfully, and if you click on the verification, it will be successful, but if you remove the check mark from the slow mode, the dump almost all FF.
Go back list [ Posted:2015-10-21 03:06:08 ] Edit Administer Top

Re:28F128J3C read/write problem Reply  
handsome
rus5404
 I installed the latest version of the program on different computers with different operating systems, updated through the programm menu, nothing helps.
What could be the Problem?
Go back list [ Posted:2015-10-21 03:06:43 ] Edit Administer Top

Re:28F128J3C read/write problem Reply  
handsome
lxl
 please download new software.
Go back list [ Posted:2015-10-23 16:50:20 ] Edit Administer Top

Re:28F128J3C read/write problem Reply  
handsome
rus5404
 If you do not see, I wrote above:
"I installed the latest version of the program on different computers with different operating systems, updated through the programm menu, nothing helps.
What could be the Problem?"
Go back list [ Posted:2015-10-26 05:25:40 ] Edit Administer Top

Re:28F128J3C read/write problem Reply  
handsome
lxl
 do you install the newest wellon software? if yes,please send error phototo weilong@weilei.com.cn
Go back list [ Posted:2015-10-26 13:09:42 ] Edit Administer Top

Re:28F128J3C read/write problem Reply  
handsome
rus5404
 Yes I did.
20th October I have twice sent you a letter to this mailbox, there was no answer, so I wrote here.
I fairly accurately described the problem in the beginning of the topic.
Here is the link to the video with the problem, it can be seen on that after finishing the process of erasing the flash memory, nothing happens, the progress bar remains empty indefinitely
https://www.youtube.com/watch?v=nPv71Mx3QKs
[ The message is modified by rus5404 ]
Go back list [ Posted:2015-10-26 16:48:27 ] Edit Administer Top

Re:28F128J3C read/write problem Reply  
handsome
lxl
 I see your video,you use elder software.
Go back list [ Posted:2015-10-27 12:21:28 ] Edit Administer Top
Total reply 7 ，total 1 page Forum Previous Next[1]

Reply the topic
Topic: *(Within 40 characters)
Author: *(The username should be within 10 characters)
Password: *(When posted the message for the first time,it will automatically registered)
Verify Code: * 7431
Sex: male female (There is no need to choose if you have registered)
Head portrait: (There is no need to choose if you have registered)
E-mail:
Q Q:
 ICQ MSN
Homepage:
Emoticons:
Ubb label:

Message
body
            (Ctrl+Enter submit)
Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

218.75 ms