Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1442,Total 29 pages

[<<][12][>>]

hi after update vp-890/990 problem

bloto22

I got now problem with firmware v21 and latest software, it just read 132MB of 256MB. Also is programming only 132MB.

I tested it on pre programmed nand flash. I only updated my wellon as it read full nand flash but does save only 50%.. now is reading only 50% and program 50%.
I only have issue with these nand flash. Any help will be apprecited.

Wellon software does not show any errors etc. All look good but it isnt..

TOSHIBA　 TC58NVG1S3ETA00 *48TS
SAMSUNG　 K9F2G08U0C *48TS

[ The message is modified by bloto22 ]

Last post :

Re:hi after update vp-890/990 problem

Reply: bloto22 registered

I tried now 4.6.5 and it seems it write correctly that file, will test parts later on the receiver.

4.6.4 been playing up..

All replies (7)

[ Posted:2014-11-10 22:22:29 ]

error programming 29f800 and29f160

kipper2k

Hi,　Programmer was working fine programming these chips, now i receive error, on all attempts to program.　Windows XP, tried uninstalling and all versions of software, 2 laptops, still no luck.

here is link to picture.

http://www.kipper2k.com/wellonerror.jpg

error is same regardless of whether i am attempting to program either 29f800 or 29f160.

Last post : Re:error programming 29f800 and29f160 Reply: lxl Host

run　"test"-->"self_test"-->"system test"　to check

All replies (3)

[ Posted:2014-11-13 08:42:09 ]

vp890 x Spansion S25FL128PIF

erika

Hello. I′ve a vp890 fw=v21.0 and sw:4.6.5 . I try to program or to read a spansion S25FL128pif (isp) give me a Device Code error= Man code: 01　Dev. Code:20 then I press ignore. But the flash not works, all spansion S25FL128PIF give me this error.
tks

Last post : Re:vp890 x Spansion S25FL128PIF	Reply: lxl
program OK?

All replies (3)

[ Posted:2014-11-12 12:23:02 ]

please add to the program BGA24 FL064PIF

separator

please add to the program BGA24 FL064PIFS
Programmer VP 990.

[ The message is modified by separator ]

Last post : Re:please add　BGA24 FL064PIF	Reply: lxl
the software will updated.

All replies (1)

[ Posted:2014-11-12 01:10:59 ]

VP890 problem after update

guliver

HI,
I update my Vp890 from firmware version 11 to version 21.
after update give me a error.
Each time a read, write all the systems I have this error:
>>Programmer trouble!ID: 010313C4130000CF

What can I do?

Last post : Re:VP890 problem after update Reply: lxl Host

1.download the newest wellon software.
2.connect wellon programmer.
3.run wellon software.
4.exit wellon software.
5.run \\weilei\wellon\wellon_reset.exe.
6.if "system updated OK!",your programmer reset.

All replies (1)

[ Posted:2014-11-12 03:26:33 ]

VP-496 error

sorin

Hi. I have a VP-496 and I wanted to read the contents of my EEPROM ( TE28F640J3C ) I get this error:
>>Do not find Adapter! Set Adapter: Run <Read> without chip on the adapter!

What am I doing wrong here?

The devince starts up and does the initalization correctly. Firmware Ver is: 20.0. Even if I remove the chip from the WL-TSOP56-F640 I get the same error. Software version 4.6.3(11/4/2014). I tested the programmer on both Win7 and XP

[ The message is modified by sorin ]

Last post : Re:VP-496 error	Reply: lxl
the picture is same. new adapter have one IC on its PCB

All replies (8)

[ Posted:2014-11-05 18:03:11 ]

vp-996 TDA9996

eliran

Hi
Can you add support for TDA9996HL/C1 I need to program his internal Eprom with isp
Thanks in advance and regards

Last post : Re:vp-996 TDA9996	Reply: lxl
don"t find its datasheet.

All replies (2)

[ Posted:2014-11-05 16:18:18 ]

VP-996

markoco

Hello, I need to be able to read and verify a Toshiba TC58NVG0S3HTA00 correctly　every time i read it the check sum changes and when i want to verify i get an error
when i want to compare it shows a lot of differences attached i have pictures　https://www.dropbox.com/s/ewxx1l3vstweyrd/Pictures%202.rar?dl=0

I"m using the VP-996 with the 10/28/14 software i tried many combinations of hard copy with no success

Last post : Re:VP-996	Reply: lxl
TC58NVG0S3HTA00　is nand chip. If the chip have a bad block, every time you read it the check sum changes and you want verify you get an error. When you copy chip, if your new chip have a bad block, your copy maybe no success. If you hope copy success, your new chip cannot have any bad block.

All replies (1)

[ Posted:2014-11-05 04:28:07 ]

at45db161b

ramyc46

I have Wellon VP380 programmer can you add at45db161b if y,plz

Last post : Re:at45db161b	Reply: lxx
Sorry, VP-380 had stop software update.

All replies (2)

[ Posted:2014-11-04 04:55:47 ]

help

ramyc46

Hi
I have Wellon VP380 programmer can you add tc58a040 if y,plz

Last post : Re:help	Reply: lxl
sorry,VP-380 don"t support.

All replies (1)

[ Posted:2014-11-03 14:43:53 ]

wellon vp390 programmer trouble

sureshenal register

my newly bought Weldon vp390 cannot program,read,blank,(not working properly) it shows programmer trouble!ID:014A703B15000049

Last post : Re:wellon vp390 programmer trouble	Reply: LXL
1.please download and install the newest wellon software. 2.run wellon.exe. 3.exit wellon.exe. 4.run \\weilei\wellon\wellon_reset.exe 5.if system update ok, your programmer OK!

All replies (1)

[ Posted:2014-11-02 13:59:07 ]

Vp390

wawan sahiri register

i,am buy vp390 but CD driver is broken, then i download the driver via internet, then install to my PC. but progrrammer cannot connect with PC (error massage is program initiate failure, the system is in demo mode)
please help my!!!

Last post : Re:Vp390	Reply: lxl
install usb driver fail.

All replies (2)

[ Posted:2014-10-31 11:58:09 ]

icsp programming 12f629

kipper2k

Hi,

Can i use the Wellon VP390 for ICSP programming the PIC12f629 and if so, is adapter available or can i just connect to specific pins on the 48 pin zif socket

Last post : Re:icsp programming 12f629 Reply: lxl Host

sorry,VP-390 do not support ISP mode.you can connect to specific pins on the 48 pin zif socket

All replies (1)

[ Posted:2014-10-28 02:04:56 ]

VP-390

altlock

hello i have a VP-390 when i pulg in usb it connects to computer i select chip when i read chit it says　>>.Read...Communication error! 0 6>> 15.08Sc--!
any reason why?

Last post : Re:VP-390	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (3)

[ Posted:2014-10-23 18:07:18 ]

WL-TSOP56-E141 Adapter Connection Table

Shoimuletz register

Hi there
I use VP-590 for programming device"s S29GL128N.
I wanna modified my WL-TSOP56-F640 to use like WL-TSOP56-E141 but
i need the Adapter Connection Table for WL-TSOP56-E141
Can you help me please with schematic diagram for WL-TSOP56-E141 ?

[ The message is modified by Shoimuletz ]

Last post : Re:WL-TSOP56-E141 Adapter	Reply: lxx
Adapter information is secret.

All replies (4)

[ Posted:2014-10-10 00:42:06 ]

AMIC A29L160A VP-480 issue

del

Hi, data sheet for this part has option to configured in 2 modes, 1mb x 16data bit or 2m x 8 data bit, in the 480 machine setting is always 1mb 16, most parts configured in system 8 x 2mbit i use, so when writing data it fails because every other WORD is FF???? please advise

e.g 12 FF A5 FF 32 FF........

[ The message is modified by del ]

Last post : Re:AMIC A29L160A VP-480 issue	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2014-10-09 22:21:20 ]

VP-890

aiman said register

please add -hy27ut088g2a -VP-890

Last post : Re:VP-890	Reply: lxx
Sorry, we don"t fint its datasheet.

All replies (1)

[ Posted:2014-10-03 17:32:37 ]

Please add Fujitsu MB91F248

sukhorukov register

First of all, let me to say thank you for your superfast support and your excellent programmers. I"ve used it for three years starting from VP480 and now VP890. Can you add support of Fujitsu MB91F248 series embedded controllers. here is the datasheet:

http://www.fujitsu.com/downloads/MICRO/fma/pdfmcu/e716803_FJ.pdf
Thanks!

Last post : Re:Please add Fujitsu MB91F248	Reply: lxx
Sorry,we don"t find its programming algorithm.

All replies (1)

[ Posted:2014-10-04 04:01:18 ]

hi how are you

elswah79

i have spi flash winbond w25q128fv i need to read and write status register can you help me

Last post : Re: hi	Reply: myx1
software can read and write status register. please enter "config",and set. and select "prog config" on the right side when programming.

All replies (1)

[ Posted:2014-10-07 09:06:12 ]

vp-890

aspiration.emas register

i want to use vp-890 in win xp but i have not the driver , can help
also i want which update can use
thx

Last post : Re:vp-890	Reply: lxl
please download V4.6.4 software.

All replies (1)

[ Posted:2014-10-02 20:04:42 ]

VP-890

aiman said register

please add -hy27ut088g2a -VP-896

Reply the message

[ Posted:2014-10-02 02:11:59 ]

need help for vp-480

no3mangroup register

i have vp-480 and want driver for windows 7 64 bit i try it to work but not work

if any one have driver please give me link to download it

[ The message is modified by no3mangroup ]

Last post : Re:need help for vp-480	Reply: lxx
http://www.weilei.com/dow.asp

All replies (3)

[ Posted:2014-09-27 23:13:27 ]

vp 180

Konrad

hi programmer vp 180 is it possible to upgrade to vp 190 , my The Version 4.2 software does not work on windows 7 x64 and The Version 4.3 does not recognize the programmer.

Last post : Re:vp 180	Reply: lxl
sorry,cannot.

All replies (1)

[ Posted:2014-09-29 01:13:11 ]

nmc27c16bq

zige79

Hi. My VP-390 fails to program these these chips (nmc27c16bq), i"ve tried new and old software/firmware. These chips are new and I have had no problems burning them on a friends programmer.

Last post : Re:nmc27c16bq	Reply: lxl
yes,you can send us to repair.the programmer and the chip. you need Bear Maintenance cost and Delivery fare.

All replies (15)

[ Posted:2014-06-11 18:16:26 ]

atmega 328

pippo

Hello
I have a vp890, and I have to burn two files (program.hex in flash memory and setting.epp in eprom memory) in an ATmega328p, how can I do it?
Thank in advance.

Last post : Re:atmega 328 Reply: lxx registered

1Load program.hex to Buffer.
2Load setting.epp to Buffer.When dialog box is show,please set"Clear buffer Options" disable and set "To buffer address" 8000H.
[ The message is modified by lxx ]

All replies (1)

[ Posted:2014-09-21 22:26:21 ]

VP-390

solutronica register

Hola buen dia, podrias ayudarme con el programador VP-390; necesito programar un GAL22V10D; al seleccionarlo y darle programa me aparece el error 2F21E7F2000000D1.

Hello have a nice day, could you　help me with the VP-390 programmer; I need to programm a GAL22V10D; just to program it; to select and give it the error 2F21E7F2000000D1 appears.

.............
I′m using windows XP SP2. with ver 4.6.0(18-02-13)

I need to copy a GAL22V10D.

just when to read the GAL22V10D appears this
programmer initiate success!
programmer troubleID: 2F21E7F2000000D1
????

[ The message is modified by solutronica ]

Last post : Re:VP-390	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (2)

[ Posted:2014-09-13 03:57:16 ]

About VP-498

MSL

Please, I have this programmer and I need to know just 2 things:

1 - What software version updated can be used? There isn"t VP-498 at download page (http://www.weilei.com/dow.asp) and programmer list (http://www.weilei.com/per.htm)

2 - Is it be possible to read Philips PLC18V8Z? This is a PAL device that is compatible with PEEL18CV8 (it is listed to work in VP-498).

Best regards!

Last post : Re:About VP-498 Reply: lxx registered

1You can use the newest software.
2 About PLC18V8Z,we don"t have its programming algorithm.

All replies (1)

[ Posted:2014-09-10 20:54:40 ]

gp-1 programmer mcu

guruji

hello i want to know which programmer will support the chips mcu kb9012qf
lm4fs1ah5bb TI stellaris
renesas r4f2117lp h8s
do you have jtag programmer or isp mode

Last post : Re:gp-1 programmer mcu	Reply: lxx
1 VP-996 support KB9012 isp mode. 2 We don"t find LM4FS1AH5BB"s data. 3 We plan to support R4F2117LP, but we don"t support it now.

All replies (1)

[ Posted:2014-09-08 15:18:08 ]

vp-499 missing devices?

defor

I just bought a VP-499 specifically to read and write TC58V64AFT, but in the software (version 4.6.4, the part number is not listed.
Part number is listed online as supported in the vp-499:
http://www.drivestar.biz/vp499-programmer-p-3019.html

but when i look at your listing
http://www.weilei.com.cn/VP-499list.htm

the part is not listed?
how can I make the VP-499 use TC58V64AFT ?

Thank you!

Last post : Re:vp-499 missing devices? Reply: lxl Host

VP-499 is another type programmer.

All replies (3)

[ Posted:2014-08-26 01:13:02 ]

Vp990 Error

kyo

Hello! Please i need help you with Vp990. Use software 4.6.4 and firm=21.0. Show error: Programmer Truble!ID 0108D896130000BA. Best Regards

Last post : Re:Vp990 Error	Reply: lxx
Please send screen-capture to support@weilei.com.cn

All replies (1)

[ Posted:2014-08-29 02:49:23 ]

vp-298s always frozen screen on select

pickler

i have vp-298s and it always frozen the screen when i select the model of bios,someone can help me ?

Last post : Re:vp-298s	Reply: lxl
please download new software. please send error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2014-08-19 05:27:33 ]

firmware

Arend

I tried to make the update, the actual firmware is 19, I don’t know if it’s the last, but the software tells me to reconnect de USB cable and the LINK blue led turns off and nothing happens it stays the same forever.

[ The message is modified by Arend ]

Last post : Re:firmware	Reply: lxl
your firmware do not need update.

All replies (1)

[ Posted:2014-08-18 04:54:12 ]

New Memory

Arend

Is there the possibility to put the M29F800DB70M1 for sot44 in this programmer, I think it’s only a question of programming it for this new memory soquet isn’t it? Or you can tell me how to do it by myself if it’s possible ok? My programmer is the vp-390

[ The message is modified by Arend ]

Last post : Re:New Memory	Reply: lxl
VP-390 can not support 29F800DB sop44 package because hardware. maybe you can self make a adapter form tsop48 to sop44.

All replies (1)

[ Posted:2014-08-18 04:39:53 ]

New memory

Arend

Hello, I have a Wellon VP390.　It′s possible to add the microchip ST M29F800DB70M1, a need to read and write it?

Last post : Re:New memory	Reply: Arend
thats bad. [ The message is modified by Arend ]

All replies (2)

[ Posted:2014-08-16 20:33:36 ]

Windows 8

Eddy

I"ve downloaded the newest firmware 4.6.4 but it does not support Windows 8!!!!
Do you have one that supports windows 8 ?

Last post : Re:Windows 8	Reply: lxl
please find the driver from \\weilei\wellon\usbsys64

All replies (3)

[ Posted:2014-08-11 23:08:30 ]

firmware

Arend

How can I update the firmware?

Last post : Re:firmware	Reply: lxl
if need,you can. "help"-->"system Update"

All replies (1)

[ Posted:2014-08-17 02:18:37 ]

SAMSUNG K9F6408U0C

Infirmier

Hello

everytme i want to program an SAMSUNG K9F6408U0C (new), i get this

>>Man.Code:EC　 Dev. Code:E6
>>.Auto Program......
>>.Erase......
>>.Program......
>>Device Address:00000001H　Device Data:00H　Buffer Data:27H
>>Auto Program fail!
>> 9,80Sec
----------------------------!

using wellon vp-490 with WL-PSOP44-U001 adapter
power cable in
using latest software on windows 7 64bits

thanks

Last post : Resolved:SAMSUNG K9F6408U0C Reply: Infirmier registered

resolved
even its a new chip,it doesnt work
another chip can be programmed
thanks for your help and your great support !

All replies (4)

[ Posted:2014-08-14 18:41:36 ]

Please add M29W256GH and 38vf6401

sukhorukov register

Hello. Please add Micron M29W256GH chip for VP890 programmer. Datasheet can be found here

http://dl.btc.pl/kamami_wa/m29w256gl.pdf
Please also add SST 38vf6401 datasheet

http://www.tme.eu/en/Document/2bcee03db2cda506f623b4088dae2b81/SST38VF6401_6402_6403_6404.pdf

Last post : Re:Please add M29W256GH and 38vf6401	Reply: lxl
please download new software.

All replies (1)

[ Posted:2014-08-12 18:10:17 ]

Vp890 x Microchip

guliver

Hello, I have a Wellon VP890.　It′s possible add the microchip pic32mx 450,575.440 ISP ?
Tks

Last post : Re:Vp890 x Microchip	Reply: lxl
we have not support it because have not its correct　programming specs.

All replies (1)

[ Posted:2014-08-07 19:34:17 ]

NAND Flash TC58NVG0S3ETA0B

lelobq

hello, can include NAND Flash TC58NVG0S3ETA0B

Last post : Re:NAND Flash TC58NVG0S3ETA0B	Reply: lxl
the soft is updated.

All replies (1)

[ Posted:2014-07-31 04:19:42 ]

programming

trinc

programming file types. I used a Needhams EMP-11 for years and the rom files are stored as ascii hex, my new vp/emp-596 autodetects these files as binary but do not program correctly. how can I convert or load these files correctly

Last post : Re:programming	Reply: lxx
Our software donn"t identify that file. Please use EMP-11t to change that file into Hex file or bin file.

All replies (1)

[ Posted:2014-08-06 22:14:26 ]

My vp-590 Prog.firmware update FAiL !!

mcb58

Hi,
i have vp590 programmer using with fimware v18, and today i installed new software　v4.6.4 ,and i　started to update the fimware , while updating it"s stopped suddenly and　not complete the process!!!

now, all lights are off, When plug the USB to the computer
it says "unknown USB device" .. software not recognize the programmer and no further update..

How can i recover　the bootloader/firmware ? any dump to send me
and urgent help needed??

Regards

Last post : My vp-590 Prog.firmware update FAiL !! Reply: mcb58 registered

Thanks for your help, it returns to the life :)

All replies (2)

[ Posted:2014-08-04 19:52:15 ]

PIC32mx440 and PIC32mx575

erika

Please would add Pic32MX440F512H and PIC32MX575F256H (ISP-4wire JTAG) ?
Programmer is VP890

Best regards

Reply the message

[ Posted:2014-08-03 16:28:58 ]

unable to program 16f684

sinipr

i am unable to program PIC16f684 with VP290, it gives insertion test error for all the 14 pins --- kindly help.

Last post : Re:unable to program 16f684	Reply: lxl
please send error photo to weilong@weilei.com.cn,we will send you reset software.

All replies (1)

[ Posted:2014-08-02 03:14:59 ]

VP-996 trouble ID

Tim

What do the two LEDs indicate.　They are not described in the manual.

I just received my new VP-996 but I am having trouble.

I get Programmer trouble ID 410FF3D7000000E6 when I do a verify of a TMS370C758B.

Also I noticed that the 48 pin socket is not level with the surface of the programmer.　The socket is lower at the top (handle side) and higher at the bottom of the socket.

Last post : Re:VP-996 trouble ID Reply: lxl Host

please send error photo to weilong@weilei.com.cn,we will send you reset software.

All replies (1)

[ Posted:2014-08-01 22:14:27 ]

intel da28f320j5

cerrajeriamty register

help me i can"t read and write intel da28f320j5 with wellon gp400

Last post : Re:intel da28f320j5	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (3)

[ Posted:2014-07-24 08:51:19 ]

vp-996

eliran

Hi
I just got my new programmer vp-996
Can you add support pls for this chips? I was working with them with my old programmer but they not in the list, I really prefer to work with one programmer not two.
ST-72F321BJ7 TQFP44
ST-72F324J6T6 TQFP44
NEC D78F9222CX DIP-20
THANKS IN ADVANCE

Last post : Re:vp-996	Reply: lxl
The documents you provided are not the algorithm files of those chips. If we find the algorithm files of those chips, we will add them.

All replies (3)

[ Posted:2014-07-23 16:48:42 ]

vp-990

dippy

Hello vp-990 new update or not?　Update not what used it programmer,Pls infatmation

Last post : Re:vp-990	Reply: lxl
you can download new software V4.6.4.

All replies (1)

[ Posted:2014-07-26 00:59:02 ]

da28f320j5

cerrajeriamty register

please give me a favor　im needing datasheets da28f320j5

Last post : Re:da28f320j5	Reply: lxl
http://pdf-file.ic37.com/pdf4/INTEL/DA28F_datasheet_802991/130498/DA28F_datasheet.pdf

All replies (1)

[ Posted:2014-07-25 13:58:07 ]

vp-996 H27U2G8F2CTR

eliran

Hi
I have a problem with this chip H27U2G8F2C read all ok but when I verify
I get this error
>>.Verify......
>>Device Address:08400000H　Device Data:55H　Buffer Address:08400000H　Buffer Data:00H
>>Verify fail!
>> 447.06Sec
Pls advice

Last post : Re:vp-996 H27U2G8F2CTR	Reply: myx1
if your useful datas are before 0x1458000H,after program it can be run　well on your board. if over 0x1458000H,it may be ok or not.you have to use another one that has no bad blocks from 0 to the end of the useful datas. 0x1458000/0x21000=0x9D [ The message is modified by myx1 ]

All replies (4)

[ Posted:2014-07-23 22:19:26 ]

Total 1442,Total 29 pages

[<<][12][>>]

search: title content user

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

187.50 ms