Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1442,Total 29 pages

[<<][14][>>]

vp-490

donggun

>>Programmer initiate success!

>>Programmer trouble!ID: 0108DFFFFFFFFFFF

help

Last post : Re:vp-490 Reply: lark registered

Please PrintScreen on the whole interface including the error message and send it to lark@weilei.com.cn

All replies (1)

[ Posted:2014-04-07 15:46:23 ]

VP-390 refusing to program 27C512"s

davewgtn

Hey there. I have a VP-390, and when I try to program a 27C512, it starts programming and then errors after 5 seconds or so. Here is the error:

>>.Auto Program......
>>.Blank Check......
>>.Program......
>>Device Address:00000000H　Device Data:FFH　Buffer Data:F3H
>>Auto Program fail!
>> 4.59Sec

I have tried with many 512"s, including new. Software version 4.6.4, firmware 20.0. Please help! Thanks

Last post : Re:VP-390 refusing to program 27C512 Reply: lxl Host

You can program the 27c512 with other programmer to check if the chip is bad.or send the programmer and the chips to us to check.

All replies (19)

[ Posted:2014-02-06 09:46:06 ]

Adapter WL-EBGA64-E140-2

0_omega

hello need this adapter the, but not that serious programmer appropriate., someone can help me.

thanks for everything and greetings

Last post : Re:Adapter WL-EBGA64-E140-2 Reply: lxx registered

Please send your order and your address to weilong@weilei.com.cn

All replies (1)

[ Posted:2014-04-04 03:22:00 ]

adapter+programer eprom K9F1G08U0D

hmarcos

Hi how are you .. i need buy adapter and programmer for eprom K9F1G08U0D
48-pin TSOP1
Standard Type
12mm x 20mm
PLS helme thank marcos

Last post : Re:adapter+programer eprom K9F1G08U0D	Reply: lxx
VP-996 support this chip. The chip has less then 3% bad block. If programmer find bad block when it is programming, it can skip the bad block and mark in the chip according to the standard.

All replies (3)

[ Posted:2014-03-24 06:05:11 ]

adapter problem vp-896

specialmio register

hi , i have changed my vp-890 with new model vp-896 ...before never problem with chip Spansion S29GL128N90TFIR2 with vp-890 and adapter original weilei WL-TSOP56-A641 ....now not read and write : >>Do not find Adapter! Set Adapter: Run <Read> without chip on the adapter!

i have try with chip and without chip ....it"s possible remove adapter check ?

please help me ......

Last post : Re:adapter problem vp-896 Reply: lxl Host

the adapters of over 48 pin that worked on vp890, now on　vp896 do not work out

All replies (3)

[ Posted:2014-03-19 00:21:48 ]

MICROCHIP 28C64A *32PL Device Required

GGaulin

Hi,

I have the VP-290 and I"m trying to work with an old device that has the Microchip 28C64A-15/L chip installed. I know these chips are very old but I would like to try and use it. Is it possible for you to make a device for this that can use your WL-PL32-U001 adaptor? I know ATMEL sells a compatible EEPROM (AT28C64B) but you also do not have a device defined that uses PLCC packaging.

Cheers
George

I think I just answered my own question, I hope :)

I just ordered a PLCC32-DIP28 Adapter, I will give this a try and let you know. Please feel free to comment if you know this will not work. The datasheet for this chip shows that the pins are not directly 1 to 1 mapped between the DIP/SOIC to the PLCC version.

I made-up a pin mapping between the 28 PIN and the 32 PIN PLCC using hookup wires and connected this to the VP-290 and now I can read and write the EEPROM.

[ The message is modified by GGaulin ]

Last post : Re:MICROCHIP 28C64A *32PL Device	Reply: lxl
yes,you are right.

All replies (1)

[ Posted:2014-03-20 03:26:04 ]

MICROCHIP 28C64A Wrong Size

GGaulin

Hi,

I am using the VP-290 and trying to read this EEPROM; the device information is: Size:2000H * 8 (8 K * 8).

I am only able to read 8K bytes of data, the editor size is restricted to 8K, I need to read / write the full 64K.

Can you please update your database or if I am doing something wrong please guide me in the right direction.

Thank You.

Last post : Re:MICROCHIP 28C64A Wrong Size Reply: lxl Host

28C64A is 8k byte chip!!!!

All replies (1)

[ Posted:2014-03-18 12:05:50 ]

communication error vp490

mariusz971 register

hi, I"m using VP-490 and it was working good up to last update. Today I installed new update (v4.6.3).　Software recognize my interface but I can not read, write...ect, everytime show me "communication error" but when I removed eeprom from socket and when I try to read again, programm tells me "no device on socket. I tested with AT93c46 and AM29F800BB (using adapter sdp), please tell me what I should do, thank you

Last post : Re:communication error vp490	Reply: lxl
please download new software.run "help"-->"system update"　to update firmware.

All replies (14)

[ Posted:2013-09-16 09:23:09 ]

GP-20 s29gl-n security sector

oleg3

Can I program the security sector in spansion s29gl-n series using wellon gp-20?
Or at least to execute custom CFI command?

Last post : Re:GP-20 s29gl-n security sector	Reply: jin
Please note : Secured Silicon Sector region is one-time programmable region.

All replies (2)

[ Posted:2014-03-14 03:29:39 ]

wl-tsop56-640

ty1234

hi can someone tell em where to buy adapter wl-tsop56-640

Last post : Re:wl-tsop56-640	Reply: lxx
The adapter is WL-TSOP56-F640.You can order it from our company. Please Email to support@weilei.com.cn.

All replies (1)

[ Posted:2014-03-12 23:51:06 ]

Programming VP-280

aje_fr

Hello,
I have specific component to program and my wellon don"t have them listed.
I wanted to know if their is any kind of help file to design my own software for programming this component.
Any DLL / help file / sample code ?
Thanks

Last post : Re:Programming VP-280	Reply: lxl
sorry,no.

All replies (1)

[ Posted:2014-03-10 22:28:51 ]

VP-590 aceita 29f32g08cbaca

vladicell

ola amigos do forum
tenho uma programadora vp-590 e preciso trabalhar o 29f32g08cbaca
qual adaptador devo usar?

thanks
vladicell

Last post : Re:VP-590 aceita 29f32g08cbaca Reply: LXL registered

sorry,vp590 do not support it.

All replies (3)

[ Posted:2014-03-08 09:10:25 ]

H27U1G8F2B　- VP890

erika

Hello, I try to programer H27U1G8F2B and give me a error

>>Man.Code:AD　 Dev. Code:F1
>>.Auto Program......
>>.Erase......
>>.Program......
>>Device Address:04308000H　Device Data:00H　Buffer Data:15H
>>Auto Program fail!
>> 242,84Sec
----------------------------!

not erase adresses from 04308000h until 04328FFF, this adresses is 00h

Any sugestions ? tks

Last post : Re:H27U1G8F2B　- VP890 Reply: erika registered

it′s possible fix the bad block ? chip H27U1G8F2B
Very thanks

All replies (2)

[ Posted:2014-03-07 10:01:35 ]

Vp-990　reading Freescale

denis500

Hello, how to read correctly MC9S12DG128BCFU *80PQFP(ISP)?After readings are the same fffff

Last post : Re:Vp-990　reading Freescale	Reply: denis500
how to check it is protected?

All replies (2)

[ Posted:2014-03-06 08:56:14 ]

VP-896 APOYO CON K9GAG08U0E

carlosqb1

HOLA, EL K9GAG08U0E DEMORA DEMASIADO PARA LEERLO　UNOS 25 MINUTOS UNA VEZ LEíDO ,CUANDO SE　GRABA DESPUES DE 5,7 ò
10 MINUTOS SALE UN MENSAJE,　ERROR DE COMUNICACION , LOS COMPONETES SON NUEVOS, TENGO 10 UNIDADES, EN TODOS SALE EL MISMO MENSAJE , ERROR DE COMUNICACION. ALGUN METODO PARA GRABAR ESTOS CHIP.

[ The message is modified by carlosqb1 ]

Last post :

VP-896 APOYO CON K9GAG08U0E

Reply: myx1 registered

K9GAG08U0E may have bad blocks.
first of all,you should download new software.
　choose prg-mode in "config",then you can select "Hard Copy(no verify　)"and "Used(page8628)",and have a try.
　"Hard Copy(verify)"is used for the chip with no bad blocks.but K9GAG08 is too large,so I suggest "Hard Copy(no verify)"mode.
　"skip bad block"mode,we mark bad block by 0x0 according to the datasheet.if your systems are not use this mark,it may not work even prgoram is ok.

All replies (1)

[ Posted:2014-03-03 16:11:27 ]

VP990, support PCF 80C49

kruPL

Hello.
VP-990.
It"s possible read program memory (ROM) from mcu PCF 80C49 ?.

[ The message is modified by kruPL ]

Last post : Re:VP990, support PCF 80C49	Reply: lxx
80C49 is masked ROM. Programmer don"t support it.

All replies (1)

[ Posted:2014-03-03 05:34:07 ]

Auto Program Fail! VP-390

Nix

Hi Support,
I have a VP-390 Programmer and i was try reprogram this Chip Eprome:
ST M27V160 but always i get this message:
>>.Auto Program......
>>.Blank Check......
>>Device Address:00000000H　Device Data:FFFFH　Buffer Data:0009H
>>Auto Program fail!
>> 3.92Sec
----------------------------!
I have try with many chips eprome but always get message as above.
Any idea how to fix this problem please...

Thanks in advance

Nix

Last post : Re:Auto Program Fail! VP-390 Reply: jin registered

Try to write this chip with other programmer to check if the chip is good.

All replies (3)

[ Posted:2014-02-25 15:55:56 ]

run time error 429

W12

sa-wad-dee there.
i have VP-390　 was run time error "429" How can i solve this problem ?

Last post : Re:run time error 429	Reply: W12
New software is working good. Thanks,

All replies (2)

[ Posted:2014-02-22 04:00:39 ]

VP890

Erika

please add TC58NVM9S3EBAI4

Last post : Re:VP890	Reply: jin
You can download our latest software.

All replies (1)

[ Posted:2014-02-22 10:39:35 ]

K9F1208U0B and GP800

RTVM

Hi support,

i need help regerding this NAND Flash from Samsung. When i read it with my Wellon GP800(sw 4.6.4 and fw 20) i got an empty file . All data are FFs. Can you please check this.

THANKS,

RTVM

Last post : Re:K9F1208U0B and GP800 Reply: RTVM registered

All work fine now.
Thanks

All replies (3)

[ Posted:2014-01-20 05:43:39 ]

NAND512W3A verification problem

skomy

I have problem with programming memory NAND512W3A (or K9F1208U0C) by VP-990 programmer.
On software 4.6.0 (03/02/2013) and firmware 18.0 it works ok, but on new 4.6.4 (13/01/2014) and firmware 20.0 it is verification problem during programming.
I tested 6 ic, the same problem on offset 2FDh.
Is it a software bug?

Last post :

Re:NAND512W3A verification problem

Reply: RTVM registered

Please contact me on email: tuning-chip@gmx.net

Thanks,

RTVM

All replies (3)

[ Posted:2014-01-28 05:01:11 ]

FRAM

sam_lim116 register

which model can program FRAM?

Last post : Re:FRAM	Reply: lxl
chip type?

All replies (1)

[ Posted:2014-02-15 17:16:01 ]

Clear OTP and SRegister w25q64fvs

Alisson

How to Clear OTP and SRegister w25q64fvs?　

have no idea, any helps?

Last post : Re:Clear OTP and SRegister w25q64fvs Reply: lxl Host

OTP　can not clear!　

All replies (1)

[ Posted:2014-02-15 18:49:07 ]

wellon vp-890

aiman said register

Hi:plis add - Clear OTP and SRegister w25q64fvs　VP-890

Last post : Re:wellon vp-890	Reply: lxl
OTP　can not clear!

All replies (3)

[ Posted:2013-12-29 07:53:44 ]

vp 890

Alisson

I have a VP 890 and i can not get it to work. when I install the software there is no option to set model vp 890.　But the　device conects anyway and it gives an error with 3 red leg.

　 Solution please,　guessing problem is the software. which one should I instal once there is no software for the VP890?

thanks all

Alisson

Last post : Re:vp 890 Reply: lxl Host

please send error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2014-02-15 03:23:14 ]

Error chose IC

vellon user register

Latest downloaded SW　Ver: 4.6.4( 13/2/2014 ) with or without VP590 i cant chose IC. When i click Select i got this message

http://prntscr.com/2s1xuv

Last post : Re:Error chose IC	Reply: vellon user
thanx for info but still is same problem with Ver: 4.6.4( 14/2/2014 )

All replies (2)

[ Posted:2014-02-13 18:16:39 ]

ENE KB9012QF

ars44

Hello, I have got a programmer VP990. Could you please add a support for a embeded controller KB9012QF. This controller has a flash of 128KB that needs to be reflash. When will you add this thing for what I told you earlier.
Here is a file that was read by another programmer(was read by this tool USB SPI Tiny Tools) :

http://notebook1.ru/forma1/download/file.php?id=27326

Last post : Re:ENE KB9012QF	Reply: lxl
the software is updated, please download new software.

All replies (16)

[ Posted:2013-07-31 06:51:25 ]

Programming PIC18F4520 with VP-498

wakeen1966 register

I cannot get a successful program on any Microchip PIC18F4520. I have tried many different versions of your software with Windows 7 32 bit and Windows 8.1 64 bit. Can you please help me....

Last post : Re:Programming PIC18F4520 with VP-498	Reply: wakeen1966
Did not work. It seems that it is putting the data from the buffer into locations 01H and 02H at which point the verify catches the error.I will email a screenshot of the read of the device after the failed programming so you can see for yourself.

All replies (10)

[ Posted:2014-02-07 04:16:01 ]

WL-TSOP48-U002 and WL-TSOP48-U002

Marko

Hello,

I would like to progra AM29F800BB -70EC with VP-390 and it reports that it is not supported.
Every time I try to read or write i get:
"NoteVP_390 The device isn"t supported"　but if I look on list on your website it is "supported"
I have adapter WL-TSOP48-U001. In device list it is written that I need adapter WL-TSOP48-U002 . What is difference between U001 and U002? Can I modify from 1 to 2 ?

[ The message is modified by Marko ]

Last post :

Re:WL-TSOP48-U002 and WL-TSOP48-U002

Reply: Marko registered

Thats what I call support !!!
It works now THANKS.
I had to use slow program but it is all ok now.

Keep up the good work.

All replies (8)

[ Posted:2014-02-05 04:44:22 ]

programming en29lv320bt

mikans

Hello,
I would like to read and write en29lv320bt from EON with VP-390 but it is not in support device list. Can You please help me?

Last post : Re:programming en29lv320bt	Reply: mikans
I will try. Thank you.

All replies (2)

[ Posted:2014-02-11 02:46:29 ]

vp996

tom

hello. I have a problem with the software programmer vp996 I have this message cinf.mdb lib "run-time error 3049. Operating system windows xp. It looks like this.

http://postimg.org/image/8v8uege4l/

[ The message is modified by tom ]

Last post : Re:vp996	Reply: lxl
please download new software.

All replies (22)

[ Posted:2014-01-09 06:04:56 ]

Weilong: Need your help with my VP-280!

My VP-280 thinks a chip is on the socket and there is not! :(

Un&Re-installed the WUP&T software. Tried other USB cables. Ran System Update with WUP&T program and JP1. Followed Contents: 3.7 Error Message. No fix. :(

After JP1, got error message 005EBE044545B68C when I try to check/program a chip.

Removed the top part of 280 (socket, pn# T10-4525) and WUP&T starts ok. But can"t program.　When I put the top back on--WUP&T starts with same error message. Still can"t program. :(

Last post : Help with my VP-280! Reply: Tx registered

Replace V8,V27(SS8550) and Q1(SS8050) on the top board as directed. Ran Self Test. Programmer software reports: System Test OK! :):):)
Programmed 27C4096, ok. So, so far so good. Going to program some more chips in the morning. :D

All replies (3)

[ Posted:2014-01-18 07:36:47 ]

VP-996

Domin

Hi. I have　problem with my VP-996. When i read AM29F800BB gets differentchecksum with every attempt. I try with different software version　 and last　update firmware (20). Please help. Regards Dominik

Last post : Re:VP-996	Reply: lxl
select "Device ID Check", is chip ID correct? please send us error photo. [ The message is modified by lxl ]

All replies (3)

[ Posted:2014-02-06 05:06:44 ]

Wellom VP390 comunication error

ruffles1986 register

Hello. Today when i go to read a eeprom 24c04 wellom give me comunication error, then i try with others eeprom and came same error.
I install last version and update firmware to 20.0 but the problem persist...

How i can solve this error?

Thanks
http://imageshack.com/a/img842/9845/s87e.jpg

Last post : Re:Wellom VP390 comunication error Reply: lxl Host

we have sent you　wellon reset software.

All replies (1)

[ Posted:2014-02-07 07:16:12 ]

how my vp-28a fire-codeing　stm25pe80?

linrui0291 register

please help,how can my vp-28a+ programing a stm25pe80?
i want a update-software.
my email:linrui0291@163.com
thanks a lot.

[ The message is modified by linrui0291 ]

Last post : Re:how my vp-28a fire-codeing　stm25pe80?	Reply: lxl
the last ver of vp-28a+ is Ver 3.9.7

All replies (1)

[ Posted:2014-02-04 21:26:02 ]

Few problems with VP590

vellon user register

Hello, first my problem is why i cant programm flash ic AM29LV160DB i can done job in "Slow Program/Read", other problems are ... in device info i dont see pinout, device info nothing have, package no have picture and on the end this

http://prntscr.com/2pph6i sometimes i think how i chose wrong programmer

Reply the message

[ Posted:2014-02-05 21:05:59 ]

Vp890 - TC58NVM9S3EBAI4

Guliver

Hello I′ve a VP890 and I need to read a BGA TC58NVM9S3EBAI4, its possible to add ? tks

Last post : Re:Vp890 - TC58NVM9S3EBAI4	Reply: lxl
we will update software.

All replies (1)

[ Posted:2014-01-31 01:27:26 ]

S29GL512S12 on VP890

Markfrizb

I have VP890.　Can it program S29GL512S12 spansion flash rom 512mbit tsop56?

What adapter would I use?

Thanks

Last post : Re:S29GL512S12 on VP890 Reply: lxl Host

yes,WL-TSOP56-E141

All replies (1)

[ Posted:2014-01-31 12:01:20 ]

wellon vp-590

NIshu

vp_590 should erase eproms ?

Last post : Re:wellon vp-590	Reply: lxl
no!

All replies (1)

[ Posted:2014-01-31 02:23:58 ]

wellon vp-590

gomcy

dear sir,
i am　update wellon vp-590 software.with Ver: 4.6.4. but there is not show vp-590 please give sloution

Last post : Re:wellon vp-590	Reply: lxl
you can download Ver 4.6.4 software.

All replies (1)

[ Posted:2014-01-30 23:17:32 ]

Change Language on GP400

Dekel

Hi,
How i can change the language on the device when working in stand-alone mode.
When I"m working in stand alone the device"s language change to china automatically.

Last post : Re:Change Language on GP400	Reply: lxl
please do not use chinese to download data to the programmer. the programmer will disp English.

All replies (1)

[ Posted:2014-01-28 22:22:34 ]

vp-290

farukx

vp-290 device, we are in good günler.biz 25ser the EPROM what to do with this device fails to Appendage definitely proramlayamadık.şöyl;　　　　.Programs ......
Verify ......
Device Address: 00080000H Device Data: 00H Waist December. Address: 00080000H December Waist. Data: FFH
Failed >> Programs!
Sec 200.69 >>
gerekir.saygı of what we do

Last post :

Re:vp-290

Reply: farukx registered

Teşekkür ederiz.Sorun eprom silme süresi az olduğundan tam silinmiyormuş.
Silme yaparken TPW:90sn yaptık.Yazarken 5sn yaptık.
Manuel silme gerekiyor.
Çok teşekkürler.

by by

All replies (6)

[ Posted:2014-01-24 01:15:45 ]

25l320

fabiode

Apos atualizar meu v990 não consigo mais ler e nem gravar essa memoria, 25l320, qualquer uma dessa série me da Read algo file error! aguem sabe como resolvo isso? obrigado.

Last post : Re:25l320	Reply: lxl
please us error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2014-01-24 23:24:47 ]

Programmer VP-496

Vasya2014

For chip M29DW323DT software (for programmer VP-496) shows on the adapter WL-FBGA48-E137. According to the site Wellon instead this adapter supplied WL-FBGA63-E137 now. We bought this adapter, but the software programmer when working with WL-FBGA63-E137 displays a warning:"use incorrect Adapter! current Adapter WL-FBGA63-E137 < > 17CAC2000000D2".
What should I do to work correctly programmer VP-496 and adapter WL-FBGA63-E137with a chip M29DW323DT?

Last post : Re:Programmer VP-496	Reply: lxx
Please use new software.

All replies (1)

[ Posted:2014-01-23 00:47:40 ]

VP-280 - program Flash type 29F016A ?

Progger

I have a Wellon VP-280 - can I program the following TSOP48 Flash chip:

Fujitsu 29F016A-90PFTN (16M-BIT [2M X 8])

I don"t see an option in the device lists. I will of course also need to buy an adapter, like this:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=151093045779

Last post : Re:VP-280 - program Flash type 29F016A ? Reply: lxl Host

sorry,VP-280 do not support TSOP48 Flash chip

All replies (1)

[ Posted:2014-01-05 19:36:06 ]

mx29gl128elt2i still problem

terrapigui register

Hi again
i still have problem to program macronix mx29gl128elt2i. with other programmer read good and write.
only have problem whith this device. the read is not good (change same 00 for FF) and write error. i try slow program, i trie to modify vcc value.
please i am secure is for algorithm for this device.
regards

Last post : Re:mx29gl128elt2i still problem	Reply: terrapigui
as I can send image to this forum?

All replies (2)

[ Posted:2013-12-13 18:34:28 ]

LS51universal test vector for many IC"s?

kruPL

Hello. VP990, fw19, soft 2013-08-08.
I test some TTL devices (autofind):
D120D =7420 from DDR: ls51,13,18,20,22,40,140,4082
D100D =7400 from DDR: ls51, 00, 03, 37, 38, 132, 26
UCY7440 =7440:ls51, 13, 18, 20, 22, 40, 140, 4082
UCY7438 =7438: ls51, 00, 03, 37, 38, 132, 26
74ls00　texas: ls51, 00, 03, 37, 38, 132, 26
UCY7410 CEMI: ls51,7410,7412,7413,7418,7420,7440,74140
UCY74S10 CEMI: ls51,7410,7412,7413,7418,7420,7440,74140, ok! 7410->3*3input nand, ? 74140->2*4input nand

Last post : Re:LS51universal test vector for many IC	Reply: lxl
please download new software

All replies (2)

[ Posted:2013-11-06 01:51:58 ]

MCU LOCKED ,

dippy

hello
i read sometime mcu S9S08DZ32VLC but data is blanks , power in board but not works, ic locked ?

Last post : Re:MCU LOCKED ,	Reply: gxj
I have test this chip.when the chip is secured ,you will read out "00". I think you did not connect the wire right.If you even have problems please email to us,send me your error screen. [ The message is modified by gxj ]

All replies (1)

[ Posted:2013-12-23 14:48:48 ]

VP990 and Modify Algorithm Parameters tr

sukhorukov register

Hi. I have some troubles to set fractional values in the VCC field (e.g 3,5V or 4,5V) When I set 3,8 for example, I got 3Volts in VCC value. Also ISP does not work for me, I need to reprogram ICs in circuit board and always got error, even tired to manipulate with VCC. Is there any manual how to work with ISP?

[ The message is modified by sukhorukov ]

Last post : Re:VP990 and Modify Algorithm Parameters	Reply: kruPL
If you want 3,8V try enter 3.8V. (3 dot 8 enter) . Field VCC filled 3,8V... It"s soft error.

All replies (2)

[ Posted:2013-12-12 14:38:18 ]

S9S08DZ32VLC

dippy

it is locked mcu ?

Last post : AM29F016B-90EC	Reply: dippy
WHAT　PROGRAMMING OPTION THIS IC

All replies (2)

[ Posted:2013-12-21 15:42:02 ]

Total 1442,Total 29 pages

[<<][14][>>]

search: title content user

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

187.50 ms