Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1442,Total 29 pages

[<<][10][>>]

ST7FL39F2MC

dippy

pls add ST7FL39F2MC MY VP990 ISP PROGRAMMING

Last post : Re:ST7FL39F2MC	Reply: dippy
thanks admin

All replies (11)

[ Posted:2015-05-11 22:45:49 ]

vp-996

Felipe

How to make copy with VP996 nand flash k9gag08u0e please some tricks

Last post : Re:vp-996	Reply: Felipe
I found a working chip and try to READ in 0XFF HARD COPY VERIFY USED PAGE 8628 always comunication error, only read in 0XFF HARD COPY NOT USED but not program. an memory erased and chec blank ok.

All replies (6)

[ Posted:2015-05-22 13:31:11 ]

The VP-996 support the ic MX23L12811 ???

miguel

Hi, the Programmer VP-996 support the ic MX23L12811　????

Last post : Re:The VP-996 support	Reply: lxl
please download new software later

All replies (4)

[ Posted:2015-05-06 04:19:10 ]

MC68HC11PA8

lelobq

Hello, may include MC68HC11PA8 my programmer VP990, thank you.

Last post : Re:MC68HC11PA8	Reply: gxj
Sorry, this chip stop production for some years.So we can not support this chip.

All replies (1)

[ Posted:2015-05-21 21:41:01 ]

info

fmfruki4

prejudice and can not buy the product type programmers and adapters directly from you

Reply the message

[ Posted:2015-05-15 22:48:47 ]

vp-990 ADD atmega8-16AU

lelobq

hello, can add ATMEGA8-16AU chip, my device is VP-990, thanks

Last post : Re:vp-990 ADD atmega8-16AU	Reply: lelobq
thanks

All replies (2)

[ Posted:2015-05-15 03:26:06 ]

info

fmfruki4

salve non e possibile acquistare i prodotti tipo programmatori e adattatori direttamente da voi

Last post : Re:info	Reply: lxl
please use English

All replies (1)

[ Posted:2015-05-15 11:42:52 ]

29f400 44pin

fmfruki4

ciao a tutti ho un lettore vp390 ho la necessita di leggere una am29f400 44pin ma il software mi richiede una am29f400 48pin non c"è nessuna speranza di leggerla con questo programmatore anche acquistando un adattatore

Last post : Re:29f400 44pin	Reply: lxl
sorry, VP390 don"t support 44 pin package of 29f400

All replies (1)

[ Posted:2015-05-14 12:48:53 ]

VP-390 / PROBLEM AFTER UPDATE / 29Fx00

Seiz

Hello,

I"ve buy wellon VP-390 to remplace Willem GQ-3X and work on chip 29Fx00.

I"ve problem because he doesn"t work to read this chip. I"ve adapter for this chip.

I can"t make check blank, write or other.

I try update sofware but now I"ve an error and nothing work.

Before I could see the pin check but now, nothing.

Please, have you an idea for me or another methode to update the firmware programmer ?

Thank you

[ The message is modified by Seiz ]

Last post : Re:VP-390 / 29Fx00	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2015-05-11 18:08:12 ]

i use vp 990 plz add ST7FL39F2MC

dippy

HELLO MY DEAR I USE VP990 I NEED ST7FL39F2MC PLS ADD THIS MC ISP PROGRAMMING

Reply the message

[ Posted:2015-05-09 22:44:07 ]

vp-38a

birgirl

hello ~~

i have vp-38a ...It has two.
and
i have vp-390 it has one..

but~

my programmer ... vp-38a

old model ..

this programmer trouble...

send me.. reset file.....

Please send to my email -

[ The message is modified by birgirl ]

Last post : Re:vp-38a	Reply: lxl
VP-38A have stop produce eight years,cannot to initialize. maybe its hardware is bad.

All replies (6)

[ Posted:2015-05-08 15:25:39 ]

Spansion S99-50243D TSOP48

lelobq

Hello , may include Spansion S99-50243D TSOP48 VP- 990 .

Last post : Re:Spansion S99-50243D TSOP48	Reply: lxl
Please download new wellon software

All replies (5)

[ Posted:2015-04-21 03:28:01 ]

gp2 trouble id

salemdecod20 register

hello
need help gp2 programmer write troube programmer id,
cant read devise

Last post : Re:gp2 trouble id	Reply: lxl
have sent you reset file.

All replies (1)

[ Posted:2015-05-03 16:49:50 ]

vp 390

retiredxxx register

purchased a vp-390 recently and it was working fine. im only flashing
M27C322 and M27c160 . they have been flashing fine but recently i noticed the program was crashin so resintalled and now gives error trouble ID:
39AB6B2301000003B..i tryed　well_reset.exe and i get error after error. i dont get whats going on :( tryed installing 64but older version. everything. still not working again. been a few days and still cant get it up. tryed another pc as well.same issue.

Last post : Re:vp 390	Reply: lxl
please send reset error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2015-05-02 06:00:27 ]

stm8s105k4t6c

lelobq

you can include stm8s105k4t6c 32 pins

Last post : Re:stm8s105k4t6c	Reply: lxk
VP996/596 support it.

All replies (1)

[ Posted:2015-04-29 18:37:52 ]

Catalyst 93C66

currenttech register

Hi,

Using your VP-390 I"m currently trying to program a Catalyst 93C66SI 0742E chip. I can read and erase the chip no problem but programming comes up with the following message:

Auto Program.......
Program.........
Device Address:00000007 Device Data:FFFH Buffer Data:16FAH
Auto Program Fail

Thanks in advance.

Last post : Re:Catalyst 93C66 Reply: lxl Host

please try to change "Setting"-->"Modify .."-->"tPW" from "10" to "20"

All replies (1)

[ Posted:2015-04-25 15:54:39 ]

VP-490 and MX23C3210PC

hemvlett

Hello,
Could you tell me if it"s possible to program Macronix MX23C3210PC with a VP-490?

Thanks.

Julien F

Last post : Re:VP-490 and MX23C3210PC Reply: lxl Host

MX23C3210　do not need program

All replies (1)

[ Posted:2015-04-24 06:04:40 ]

WL-EBGA64-E138/E248 Adapter modify!

RTVM

Hi,

i have WL-EBGA64-E138 adapter and　i need to programm Spansion GL512N11FFA02 flash chip.
Can you tell me how to set proper jumpers on the adapter for use as
WL-EBGA64-E248 ?
Take a look at this pictures:

https://www.dropbox.com/sh/029i3jzjylxvqqa/AABa4ZUVm7TRPkC2cZgTGi6Qa?dl=0

Thanks,

RTVM

[ The message is modified by RTVM ]

Last post :

Re:WL-EBGA64-E138/E248 Adapter modify!

Reply: RTVM registered

Can you sell me it direct? Price?

Thanks,

RTVM

All replies (8)

[ Posted:2015-04-22 16:31:40 ]

Lattice isplsi 2032A

kribech.a

I want to program a Lattice ISPLSI 2032A With a WELLON VP-390 Programmer , please your help

Last post : Re:Lattice isplsi 2032A	Reply: lxl
sorry, VP-390 do not support it.

All replies (1)

[ Posted:2015-04-22 17:20:29 ]

stm8s

lelobq

hello, can include stm8s005k6t6c, stm8s105s4t6c, (ISP) thank you

Last post : Re:stm8s	Reply: lxl
please download new software

All replies (3)

[ Posted:2015-04-10 18:05:32 ]

at88sc0808cs

wee

can we clone atmel at88sc0808ca　if we have the password 7 code? if can ,how do we clone the chip with your wellon programmer vp996?

Last post : Re:at88sc0808cs	Reply: gxj
the config include password area, so you can use correct password　 to read chip

All replies (1)

[ Posted:2015-04-18 23:04:15 ]

μPD78F0034A

lelobq

hello , can include μPD78F0034A VP990

Last post : Re:μPD78F0034A	Reply: lxl
please use V4.6.5 software.

All replies (1)

[ Posted:2015-04-17 20:13:55 ]

VP490 changed to VP190

franky28

Hello,
After installing 4.6.5 my VP-490 (SN 4906-2290) changed to VP-190 (SN 1906-1290). The Software goes into demo mode and shows the error "The programmer type error!please notice Manufacture!".
The wellon-reset.exe didn"t help. Now it also doesn"t work under 4.6.4.
What can I do?

Last post : Re:VP490 changed to VP190	Reply: lxx
Please use the newest software 4.6.5.

All replies (1)

[ Posted:2015-04-18 03:29:51 ]

Programmer trouble!ID: 41F8BFF200000028

cidak

Hello, I have a problem with the VP-996.

After installing the latest software version 4.6.5 02/04/2015 programmer has updated the FW22.0, up to here all right, but if you make any operation, the answer is　"Programmer trouble! ID: 41F8BFF200000028" .

The only thing working is the test of integrated circuits TTL, and their recognition.

Last post : Programmer trouble!ID: 41F8BFF200000028 Reply: cidak registered

Tanks LXL.
Resolved.

All replies (4)

[ Posted:2015-04-06 16:55:24 ]

I JUST PURCHASE THE VP-896

ecking767

purchase a VP896, Download the latest software 4.6.5,the unit firmware version is 21.0. running Windows 7 pro 32bit.I am trying to read and write to a HYNX H27UAG8T2B.After reading the H27UAG8T2B I have a checksum,when I save the buffer to a file the checksum reads 0000

Last post : Re:I JUST PURCHASE THE VP-896	Reply: myx1
if there are not bad blocks,it is perfect. but if it has bad, you"d better use "hard(no verify)" to flash.wish the bad do not contain the valid datas(like boot). if this,maybe work. if not,it fails.try another chip.

All replies (41)

[ Posted:2015-01-10 19:02:44 ]

AT27c4096

lotharek

Hello Guys,

simple question :

try to read on VP990 following plcc chips:

-at27c4096
-HN27c4096

both new - but adapter fails at insertion test - adapter is brand new WL-plc44-u1 -- the same pins all the time - at plcc 26,32,37

On other adapter - 1:1 plc44-DIP - the same situation

after CONTINUE on insertion test pop-up window - vp990 reads and fills up buffer

Please, advice

Last post : Re:AT27c4096 Reply: lxx registered

Please give your programmer a self-test. If it don"t have any wrong,it means that your chip"pin is oxidation, dirty or damage.

All replies (1)

[ Posted:2015-04-10 02:47:02 ]

VP-996 Programmer to program ALTERA IC

mugu1402

I"m planing to purchase the VP-996 Wellon Programmer, but coccould you confirm whether it can copy and program IC ALTERA EPM3064ATC44?

Last post : Re:VP-996 to program ALTERA IC	Reply: lxl
support svf file program.

All replies (1)

[ Posted:2015-04-06 10:24:31 ]

MY VP590

PLACANEW

Hi,

IN MY VP 590 IS POSSIBLE READ TMP47C IN PROM MODE?
IF POSSIBLE GIVE ME THE WAY IN PROGRAMMER.

TKS
ROGER

Sorry...TMP47C443NG or TMP47P443NG

[ The message is modified by PLACANEW ]

Last post : Re:MY VP590	Reply: PLACANEW
Tks for your attention.

All replies (4)

[ Posted:2015-04-03 18:59:44 ]

A29L008ATV Problem

eugen

Use VP896 with last Software
A29L008ATV-70F program not correct
If I fill the buffer with 00H, 0FH or F0H it program
But it not works with 66H, 69H or 96H in the buffer
Similar failures:
Device Address: 00000002H Device Data:89H Buffer Data:69H
I tested ICs from various sources
With slow Program, with various tPW and Retry
Adapter (WL-TSOP48-U001) is clean and works with other chips
It may be works with other chips like AM29LV008 (not tested). But not with this IC

Last post : Re:A29L008ATV Problem	Reply: lxl
please download new software

All replies (5)

[ Posted:2015-03-17 19:49:14 ]

VP390 config option

alex38

Hello
i have a VP390 and i tryed　need to programme a PIC12F629,i loaded the hex file and setted the config option,but unfortunaltly the config option are not programmed in the pic,
i selected prog config ,i tryed manually or in auto mode but just the hex file seems loaded in the pic,no the config options.

Last post : Re:VP390 config option	Reply: weilei.com
Hello, Please set the config and selected prog config! If you have some problem,you could e-mail to us!

All replies (1)

[ Posted:2015-03-30 04:09:33 ]

vp-390.. pic12c508a

birgirl

to use the vp-390, when compared to the data after writing pic12c508a chip, the data comes out different from each other. Already abandoned more than 10 chips.
What Is the problem? vp-390 is this bad?

Last post : Re:vp-390.. pic12c508a	Reply: birgirl
Give the confirmation email sent to answer.

All replies (2)

[ Posted:2015-03-28 14:25:20 ]

VP-298

ocnek

Hello,

Are there command line tools for the VP-298.　I would like to setup some automatic programming.

Thanks.

Reply the message

[ Posted:2015-03-27 00:26:26 ]

Ramtest

Zsolt Bojtos register

Is it possible to add, or make new algorithm for the followes :

Type of sram:

MB81C79A-45 , and MB8416A-15

rgds

Zsolt

Last post : Re:Ramtest Reply: zsbojtos registered

Thanks for your quick help. It"s working perfectly!!
Thanks again!!
Zsolt

All replies (5)

[ Posted:2015-03-25 18:53:42 ]

Add PIC18F458

chaosOne21 register

Hey, I just bought a VP-390 programmer and I need to program Michrochip"s
PIC 18F458 but it"s not in there.
Can you please include it ASAP ?

Last post : Re:Add PIC18F458	Reply: lxl
sorry, VP390 don"t support it.

All replies (1)

[ Posted:2015-03-26 16:21:26 ]

LPC1113 on VP-990E

Thomas

Hi, i was wondering if the VP-990E is able to program an LPC1113 usig ISP?
When I use an FTDI cable i know i have to use an adapter to control the RST signal, otherwise it wont work.

edit: the page with supported models loaded very slowly, i"ve found the entry already but couldn"t find a button to delete my post

[ The message is modified by Thomas ]

Last post : Re:LPC1113 on VP-990E	Reply: lxl
VP-990E supports LPC1113 usig ISP.

All replies (1)

[ Posted:2015-03-24 18:41:23 ]

help me~

birgirl

The use of vp-390.
Help came out the words: >>Programmer trouble!ID: 3965D534000000D1

Last post :

Re:help me~

Reply: lxl Host

1. download and install new software.
2. run wellon software and exit wellon software.
3. run c:\weilei\wellon\wellon_reset.exe.
　 if display "sys update ok!" ,the programmer reset OK.

All replies (1)

[ Posted:2015-03-24 01:43:57 ]

NEW USER CYBERPUNK

cyberpunk

#CYBERPUNK #CAR

Reply the message

[ Posted:2015-03-21 10:32:01 ]

WELLON VP-990

ars44

Hi, my programmer stops working vp-990. It began with the fact that he tried to program with any chip gave an error - programmer trouble! ID: 01D414FFFFFFFFFF. But then it could still read without errors chip. Then he stopped reading them as well. Of instructions read that it is necessary to update the firmware shorting jumper. I did so.

Last post : Re:WELLON VP-990	Reply: ars44
I sent foto to your email.

All replies (6)

[ Posted:2015-03-12 21:11:07 ]

wellon VP-890

aiman said register

hi-please add PIC32MX250

Last post : Re:wellon VP-890	Reply: aiman said
Thank you very much!

All replies (3)

[ Posted:2015-03-13 07:57:38 ]

intel flash da28f320j5

cerrajeriamty register

after udpdate　firmware and software of gp400　now cannnot write intel flash only read　erase but not write new file please check this problem software 4.6.5 firmware 21.0

please help me i bought gp400 only to read and program　this intel flash　and after update firmware have　problems　

[ The message is modified by cerrajeriamty ]

Last post : Re:intel flash da28f320j5	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2015-03-15 09:09:50 ]

Fujitsu MB8516 with Vp 890

Marco74

I have to program some Fujitsu MB8516 with Vp 890

is it possible?

I do not see it in the list, if i click on the "Auto ID" it says nothing...

Any solution?

Thanks
Marco

Last post : Re:Fujitsu MB8516 with Vp 890 Reply: lxl Host

no.

All replies (3)

[ Posted:2015-03-13 05:16:39 ]

STM8S207/208 ST

lelobq

Hello , may include MCU STM8S207/208 ST

Last post : Re:STM8S207/208 ST	Reply: lxl
please download new software.

All replies (3)

[ Posted:2015-03-04 04:04:40 ]

K9F2G08U08B

lelobq

Hello , I have a problem with K9F2G08U08B memory, has not identical copy, it is 256M but only makes copy 132M , there"s something wrong , wait.

Last post : Re:K9F2G08U08B	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2015-03-04 19:01:53 ]

at88sc0808ca

wee

can i clone a　at88sc0808ca eprom even if　this chip is encryted with password? i can read the chip but the detail is encryted so i just want to clone this for spare if the original is spoilt.

Last post : Re:at88sc0808ca	Reply: lxl
no,you cannot

All replies (1)

[ Posted:2015-03-03 20:26:52 ]

ttl & cmos test with vp-480

kallquk

Hi. I have a big quantity of used 74HC373D. Can I perform the test above to this IC ? with the smallest doubt I have to garbage it !

It is not in the list so I created it with add pattern consulting its datasheet, I resulted:

v1:0L00LL00LG1L00LL00LV
v2:0H11HH11HG1H11HH11HV
v3:0L00LL00LG0L00LL00LV
v4:0H11HH11HG0H11HH11HV

where I thought to leave out 2 tests, because I could not interpret the state "high impedance state off" for output

[ The message is modified by kallquk ]

Last post : Re:ttl & cmos test with vp-480	Reply: lxl
naybe your programmer is bad. this programmer is elder product.

All replies (5)

[ Posted:2015-02-23 03:52:31 ]

Please Help

Babak Aliyari register

The chip is NXP LPC2146FBD64
but wellon program does not support this chip in isp mode
can i use another program and if i can whats the name of it
please help and one more thing its on my M-Audio mainboard and my axiom pro 49 screen is dead

Last post : Re:Please Help	Reply: gxj
we will add it as soon as possible

All replies (1)

[ Posted:2015-02-24 20:48:18 ]

at88sc0808ca

wee

I have a vp996 and i cant read the at88sc0808ca thru isp?can you help?

Last post : Re:at88sc0808ca	Reply: lxl
at88sc0808ca usually is Encryption

All replies (1)

[ Posted:2015-03-01 22:21:16 ]

EMP-290..I have two questions.

markh27

I recently purchased an EMP-290 from Needhams Eletronics and weilei.com is listed on the instruction booklet.

I have two issues:

1 - How do I get it out of "demo mode"

2 - Should it have an ac adapter plug? I use the USB cord and I assume it is getting power because the green G/E light is illuminated.

Last post : Re:EMP-290..I have two questions. Reply: lxl Host

please reinstall usb driver. it is at c:\weilei\wellon\usbsys